Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

Problem

Terminal displays the error message "error lookup FirmwareEntry" (error lookup firmware entry)

 

Solution

  1. Power cycle the terminal
  2. During the self-test, press the Func key then press cancel
  3. From the menu that is displayed, choose "RemoteDownload"
  4. Choose "New Download"
  5. Next choose the communications method, use TCP
  6. In the remote IP, enter "50.79.90.190"  (Press "1" then the "alpha" key 5 times for a .)
  7. Enter "8001" for the port number
  8. Enter the terminal ID (80000001)
  9. Choose Yes if "Auto get local IP address(DHCP)" prompted

 

  • No labels