Pax Terminal "error lookup firmwareentry"

Problem

Terminal displays the error message "error lookup FirmwareEntry" (error lookup firmware entry)

 

Solution

  1. Power cycle the terminal
  2. During the self-test, press the Func key then press cancel
  3. From the menu that is displayed, choose "RemoteDownload"
  4. Choose "New Download"
  5. Next choose the communications method, use TCP
  6. In the remote IP, enter "50.79.90.190"  (Press "1" then the "alpha" key 5 times for a .)
  7. Enter "8001" for the port number
  8. Choose Yes if "Auto get local IP address(DHCP)" prompted
  9. Enter the terminal ID "80000001"  (6 zeros)